Forum Discussion
Altera_Forum
Honored Contributor
Honored ContributorProblem programming SPI bitstream flash in AS mode
Hi all! I designed a board with Cyclone II EP2C35. This is my first design with Altera. The JTAG interface works and the FPGA can be loaded using USB Blaster. The FPGA should be normally configu...
Altera_ForumHonored Contributor
Honored ContributorThat Adesto flash is Atmel AT25DF321A.
Commands are the same as EPCS16, except of the "Read silicon ID", which is disabled by the option: http://www.alteraforum.com/forum/attachment.php?attachmentid=9795&stc=1 Jara
