Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
11 years ago

problem in interfacing

Hi all, can any one suggest me how to interface altera cyclone 3 fpga starter kit( EP3C25F324 ) and ti daughter card ( SDALTEVK/NOPB ). i have both boards. when i see both schematic diagram the...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
11 years ago

i am getting issue like Error (169079): Pad 143 of non-differential I/O pin 'TX2_SDA' in pin location L17 is too close to pad 140 of differential I/O pin 'tof_n' in pin location M17 -- pads must be separated by a minimum of 5 pads. Use the Pad View of Pin Planner to debug.