Portable Reference Platform

Why not download it ?

Thanks

--- Quote Start ---

originally posted by aihuazou@Jul 14 2006, 02:56 AM

why not download it ?

thanks

<div align='right'><{post_snapback}> (index.php?act=findpost&pid=16891)

--- quote end ---

--- Quote End ---

The download section is up and running again. Apologies for any inconvenience.

SK

Why not download it yet?

Thanks

--- Quote Start ---

originally posted by skravats@Mar 7 2006, 10:27 AM

the portable reference platform (http://www.niosforum.com/pages/project_details.php?p_id=77&t_id=45) is available for download on the system design projects page. it shows how to use nios ii and sopc builder to create embedded designs that have access to external peripherals such as tft displays, touch panels and imagers.

i will try to support any questions or comments through this forum.

regards

steven kravatsky

arrow electronics

<div align='right'><{post_snapback}> (index.php?act=findpost&pid=13193)

--- quote end ---

--- Quote End ---

Hello Steven!

I&#39;m a beginner in using of NiosII and I have a problem in developing a GUI for oscilloscope with TFT and touch panel. Please write, what a GNU Image Manipulation Program is? What can I do with it? Where I can find information about it?

Best regards, Nicholas.

PS. Thanks for Portable Reference Platform project. It helps to study very much!

--- Quote Start ---

originally posted by nick+oct 26 2006, 11:34 am--><div class='quotetop'>quote (nick @ oct 26 2006, 11:34 am)</div>

--- quote start ---

<!--quotebegin-skravats@Mar 7 2006, 10:27 AM

the portable reference platform (http://www.niosforum.com/pages/project_details.php?p_id=77&t_id=45) is available for download on the system design projects page. it shows how to use nios ii and sopc builder to create embedded designs that have access to external peripherals such as tft displays, touch panels and imagers.

i will try to support any questions or comments through this forum.

regards

steven kravatsky

arrow electronics

<div align='right'><{post_snapback}> (index.php?act=findpost&pid=13193)

--- quote end ---

--- Quote End ---

Hello Steven!

I&#39;m a beginner in using of NiosII and I have a problem in developing a GUI for oscilloscope with TFT and touch panel. Please write, what a GNU Image Manipulation Program is? What can I do with it? Where I can find information about it?

Best regards, Nicholas.

PS. Thanks for Portable Reference Platform project. It helps to study very much!

<div align='right'><{post_snapback}> (index.php?act=findpost&pid=18935)</div>

[/b]

--- Quote End ---

Though I&#39;m not Steven, I can answer your question... The GNU Image Manipulation Program (GIMP) is a popular image creation/editing program. It, generally, comes with any Linux OS and can also be installed on Windoze. The PRF (portable reference platform) uses GIMP to generate image "arrays" in C.

Cheers,

- slacker

Hi skravats.

I&#39;ve a question for you about your Por Ref Plat.

The exe file at the bottom of the page, is a kind of "filling system" where the user can personalize his own system doing the appropriate connection?

Let me explain my project.

A CMOS camera, I2C\SCCB\ interface, is connected to PROTO1 block by a Daughter Board.

Using the altera developmenat board EP2C35, fpga Cyclone II, i must catch pixels and whole frames from that camera using Nios II and Quartus II software.

My first problem is how to read datas from camera because i tried to use Pios for doing this after have seen the templates files on Nios II software. I thougt that the method used to catch the switches status was the right way for catching datas from an external peripheral like a camera,so pios should be ok. But, this solution wasn&#39;t right.

Can you explain me,what have i to use?

On while i will read your exe file. I wanna ask you this first because if this is not the right solution for my project i try to find other infos. http://forum.niosforum.com/work2/style_emoticons/<#EMO_DIR#>/unsure.gif

Many thanks.