Obtaining FPGA state information via HPS (Cyclone V)

Question

Is it possible to obtain the FPGA state data (i.e. register values, LAB contents, memory contents, etc) from the HPS part of the Cyclone V without configuration specific access structures?

altera_forum · Answer

you have to use the H2F-Bridges for that.  Maybe [1] is a good starting point for that...  [1] http://www.rocketboards.org/

Forum Discussion

Obtaining FPGA state information via HPS (Cyclone V)

1 Reply

Recent Discussions

Agilex 7 F Series Transceiver Pins Allowed Voltages During Powerup/When Unpowered

MAX10 Soft SERDES set_input_delay constraints

MAX10 1.8V LVDS Output before, during, after configuration driving LVDS 1.5V VCCIO Inputs

Cyclone 10 LP Error Detection Timing

QSPI DDR Interface with Cyclone10LP: Maximum frequency