Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

Numonyx StrataFlash Embedded Memory (P30) Conversion Milestone Update

Hello there, I'am using Cyclone III with active parallel configuration in my hardware. In the Cyclone III Handbook is specified that i have to use the Numonyx P30/P33 flash family for AP Con...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
15 years ago

Howdy.

I have done some testing cyclone III + commodity flash 65 nm parts. I used a PC28F256P30TF with a 1.8V core and 2.5V VCCIO. The design is generic with a single 3C80F780 connected directly to the PC28F256P30TF chip. There were no issues with repeated programming in Quartus and power up testing to verify Cyclone 3's hard ip support for direct reconfig using commodity flash. I didn't test the multiple image reconfig feature because I'm not there yet in the design.