Forum Discussion

Dommel's avatar
Dommel
Icon for New Contributor rankNew Contributor
1 year ago
Solved

Not able to identify Cyclone IV with Quartus2 on Windows11

Hello together, meanwhile I have a Windows 11 Home 23H2 notebook and after long time I would like to play a little with my Terasic DE0_Nano board which contains a Altera Cyclone® IV EP4CE22F17C6N. ...
Configuration
  • sstrell's avatar
    sstrell
    1 year ago

    23.1 should work fine in Windows 11. You should try reinstalling Quartus or just the USB Blaster drivers.

    Are you saying it crashes/freezes when you start the Quartus Programmer? More details on exactly what is happening.

sstrell's avatar
sstrell
Icon for Super Contributor rankSuper Contributor
1 year ago

23.1 should work fine in Windows 11. You should try reinstalling Quartus or just the USB Blaster drivers.

Are you saying it crashes/freezes when you start the Quartus Programmer? More details on exactly what is happening.

  • Dommel's avatar
    Dommel
    Icon for New Contributor rankNew Contributor
    1 year ago

    Hello sstrell,

    you're rigtht - I'm supprised but after tried to run it with Quartus-lite-18.1.0.625 (which was mentioned somewhere in the forum) I have retried with v23.1 again. I have open a really old beginner test-file and I was able to flash the Cyclone and I also could check the functionality sucessfully.

    I'm suppriesed rigth now but also confirm that DE0_Nano is runnign with Quartus-lite-23.1.