Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
15 years ago

No verification in Quartus/ByteBlaster II

Hello: I have been using the Byteblaster II for a few years on many designs. Over the last few days it started to act up after possibly some damaged hardware got introduced. The device I am p...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
15 years ago

Have you reprogrammed the same device too much? There is a life cycle on the number of erase/writes the EPM's can handle, if my memory serves me right it is around 100 cycles.