Forum Discussion

RWang54's avatar
RWang54
Icon for New Contributor rankNew Contributor
6 years ago

<terminated>nios Nios II Hardware configuration[ Nios II Hardware] nios II download

I used Nios II system to try and build a project and download it onto the FPGA board. But when I tried to run the program in Eclipse, the process is terminated at around 64%, and the only message I g...
Ahmed_H_Intel1's avatar
Ahmed_H_Intel1
Icon for Frequent Contributor rankFrequent Contributor
6 years ago
Hi, Please check the JTAG frequency, this might be the root cause for this. To change the JTAg frequency open the command shill and use the following command: jtagconfig --setparam <cable number> JtagClock <frequency><unit prefix>