Forum Discussion

noobisme's avatar
noobisme
Icon for New Contributor rankNew Contributor
2 years ago
Solved

Nios II Flash programmer download error

hi! My device family is cyclone 10 lp,flash is epcs64 I use the Serial Flash Controller Intel FPGA IP by Pltform Designer to download, it will be a error when I download by Nios II Flash programme...
Configuration
tehjingy_Altera's avatar
tehjingy_Altera
Icon for Regular Contributor rankRegular Contributor
1 year ago

Hi


We sincerely apologize for the inconvenience caused by the delay in addressing your Forum queries. Due to an unexpected back-end issue in our system, your Forum cases, along with others, did not get through as intended. As a result, we have a backlog of cases that we are currently working through one by one.


Please be assured that we are doing everything we can to resolve this issue as quickly as possible. However, this process will take some time, and we kindly ask for your patience and understanding during this period. The cases will be attended by AE shortly.


We appreciate your patience and understanding, and we are committed to providing you with the best support possible.


Thank you for your understanding.


Back to your issue, would i suggest you use the Convert Programming Files tool for this process.

You could refer to the link below on how to do this.

https://www.intel.com/content/www/us/en/docs/programmable/683104/current/programming-files-conversion.html


Regards

Jingyang, Teh