Forum Discussion

FBelsak's avatar
FBelsak
Icon for New Contributor rankNew Contributor
1 year ago

Need MAX10M04 pin low before configuration is done

Is there a way to make outputs low before configuration when not doing in-system programming? When I go into Quartus and open and compile my design using the option path Assignments>Device>Device an...
Configuration
AqidAyman_Altera's avatar
AqidAyman_Altera
Icon for Regular Contributor rankRegular Contributor
1 year ago

We sincerely apologize for the inconvenience caused by the delay in addressing your Forum queries. Due to an unexpected back-end issue in our system, your Forum cases, along with others, did not get through as intended. As a result, we have a backlog of cases that we are currently working through one by one.

Please be assured that we are doing everything we can to resolve this issue as quickly as possible. However, this process will take some time, and we kindly ask for your patience and understanding during this period. The cases will be attended by AE shortly.

We appreciate your patience and understanding, and we are committed to providing you with the best support possible.

Thank you for your understanding.