Forum Discussion

Honored Contributor

12 years ago

Multi Device AS configuration scheme

Dear Sir, In the multi-device AS configuration in which devices receive the same data with multiple .sof, nCONFIG, nSTATUS and CONF_DONE pins of Master and slave FPGA’s are shorte...

Altera_Forum

Honored Contributor

10 years ago

Refer to Figure 7-7 on page 7-16 of the cyclone v device handbook (https://www.altera.com/en_us/pdfs/literature/hb/cyclone-v/cv_5v2.pdf). Two (or more) devices boot from a single EPCS. If you want both FPGAs to boot with the same image simply put two copies of the same image into memory.

Cheers,

Alex

Forum Discussion

Multi Device AS configuration scheme

Recent Discussions

Bidirectional pin USB_RX with a pseudo-differential I/O standard must use the OEIN port of the node

Avalon-ST configuration with Agilex 3 fails

Trouble Getting started with Stratix 10 SOC

Obsolescence issues

Request for COO info