Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
13 years ago

Motor Control with DSP builder Adv BlockSet

Hi Guy I am in the process of examining the feasibility of the putting the Field Oriented Control algorithm for Motor Control on the Cyclone III FPGA. My sampling rate is just 10K/s and woul...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
13 years ago

I would say that 10Ksps is too low for a decent Field Oriented Controller. Try at least 250 kSPS, using something like a PulsarADC from Analog Devices or the LTC1407 series from Linear, particularly for the current feedback.

Best, James