Forum Discussion
tboro
New Contributor
New ContributorMAX10 ALTPLL_RECONFIG wrong frequency
Hello all, I have created a test design running on 10M08 Evaluation Kit. Its task is to alter the PLL output frequency and provide it to output pin. The fin is 50MHz from the onboard clock source. T...
AqidAyman_Altera
Regular Contributor
Regular ContributorHello,
From my opinion. it may be that the limitation of max 125MHz that was warned by Quartus Prime.
Since 257MHz is out of range, then it is not guaranteed that it will work even somehow you got it work for the other frequencies that beyond the maximum allowed.
Regards,
Aqod
