Forum Discussion
swtsven
New Contributor
New ContributorMAX10 ADC Sampling Issue after Power On
Hi,
I'm using a MAX10 (10M05DAF...) with a Nios 2 Processor. For the ADC the "Modular Dual ADC Core Intel FPGA IP" is used. Under some circumstances the sample_store registers never get filled with...
Ash_R_Altera
Regular Contributor
Regular ContributorHi Sven,
Please do following checks:
1) Is the clock required for the ADC is stable and coming from a correct source? You may refer https://www.intel.com/content/www/us/en/programmable/documentation/sam1393576011848.html#sam1393998480409
2) Check all the connections are done as recommended in the Pin Connection Guidelines, https://www.intel.com/content/www/us/en/programmable/documentation/luo1479889762304.html#hva1480571405018
Regards.
