Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

max II clpd EPM570T100I5

i want to use SMBus as well as I2C bus support from above mentioned part. if it is possible to do so? i.e. are there 4 lines (2 for SMBus and 2 for I2C)?
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

You can use any available I/O pin, but there's no dedicated

I2C or SMBus hardware interface, you have to provide it

in your design.