Forum Discussion

FXion's avatar
FXion
Icon for New Contributor rankNew Contributor
7 years ago

MAX 10 program failure

I have a cutomized MAX 10 board with 10M08DAF256C8G FPGA chip. I experienced repetitive program failure with sof file and Quartus 16.0. The first few times program failed with "Error (209014): CONF_D...
FXion's avatar
FXion
Icon for New Contributor rankNew Contributor
7 years ago

Hi Calvin,

Thanks very much for sending the information. I didn't see how changing the PLC will help with the sof file programming failure though. I believe this is fixed in newer Quartus version. I can keep clicking "Program" to bypass this, but just annoying.

Thanks