Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
8 years ago

MAX 10 CFM0 not programed

Hi there, I conceived and validated a project on Max10 dev kit. Now that the project is OK, we are in the process of developing a dedicated board, using 10M50SCE144 device which appeared good en...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
8 years ago

Well, not proud of me...

I solved the issue.

Actually, the CFM0 was properly programed, but the project was using a UFM block to save parameters.

It seems that the location was not well set for this particular device.

So when preventing the application to write over CFM block, CFM block keeps its integrity...

Sorry for this dummy post

jylo