Forum Discussion

JBenj's avatar
JBenj
Icon for New Contributor rankNew Contributor
7 years ago

Load from EPCQ fail

I have a Cyclone V FPGA connected to an EPCQ128 as depicted in the standard configuration for the device. I am able to load the .jic file and the .sof file but whenever I kill power to my board and r...
JBenj's avatar
JBenj
Icon for New Contributor rankNew Contributor
7 years ago

Nooraini,

I did as the PDF shows. I did set the Device Pin option in the Quartus project before compilation. I generated the .jic file with quartus.