Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
14 years ago

LE requirement

Hi, I like to build a system where I take data from two cameras (standard 10 bit camera interface with 27MHz clock) and write the incoming image data to SDRAM for a period of time. Later I take th...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
14 years ago

I'd say it'll fit, but for the first design, take at least 16K. Take the same package, check if all pin matches and replace the part on final design. Usually same package and same series devices are pin-to-pin compatible. Remember to select migration devices in options in case You'll run out of other resources in smaller device even You have enough LEs.