Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
12 years ago

lan91c111 autonegation

Hi First let me start by describing the hardware that I am using. I am using the SMSC LAN91C111 ethernet MAC & PHY which is driven by the NIOS II processor . I am not using a EEPROM in ...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
12 years ago

The line that Reads "the value of auto navigation reg capable is 0". the Register is Auto Negation Remote End capability Register.I have verified FLP by using the scope,nothing i can see,i have tried using the external Loop-back,but same result.can i send my total software folder weather anything i need to change the in code.