Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
14 years ago

JTAG Chain problem - no device detected (Tried with multiple boards)

Hi everyone, I'm doing some work with custom cyclone III boards and am in the process of trying to program the device using a JTAG port and a USB Blaster cable. The boards were used last yea...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
14 years ago

Try running `jtagconfig -d` from the command line and take a look at the output. If that doesn't give you anything useful then the jtag chain debugger might help.