Forum Discussion

AragornStrider's avatar
AragornStrider
Icon for New Contributor rankNew Contributor
2 months ago

Is VCCPD = 3.3V and VCCIO = 2.5V allowed on an Arria V?

Hi,  I am currently using an Arria V 5AGXMA1D4F27 device. I would like to use 3.3V on VCCPD and 2.5V on VCCIO for the IO bank. The intent is to have JTAG programming done at 3.3V(the processor doing...
Power
FvM's avatar
FvM
Icon for Super Contributor rankSuper Contributor
2 months ago

Hi,

according to datasheet Vih,max of 2.5 V bank is 3.6 V. Thus it should work well with 3.3 V logic. Measures against overshoot, e.g source side driver series termination resistors should be taken however.

Regards Frank