Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
8 years ago

Interfacing FPGA pins to an external bidirectional bus.

OK I've decided to go with Block Design Files approach to programming a IV Cyclone in Quartus. Seems easier than Verilog from scratch to me. My application has lots of pins but is fairly simple. ...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
8 years ago

Thanks jatharvk, that did the trick. I later found I can use 74xxx chips from the ..others/maxplus2 library and use two 74373b "chips" for an internal 8 bit bidirectional library in one shot.

very impressive! simple, quick!.