Forum Discussion

New Contributor

2 years ago

Solved

HSMC to GPIO

Hello, I was wondering how I could connect the GPIO-HSTC card on the max 10 development kit which has HSMC. I used it but the JTAG connection is lost by connecting it. In Digikey, there is another ...

Generic Io

AqidAyman_Altera
2 years ago
With my last answer provided to you, is there any more information needed from you? Please let me know if you need further support as I am happy to help you more.

If there is no more support needed, I will close this thread.

AqidAyman_Altera

Regular Contributor

2 years ago

Hello,

For the connection on the HSMC port, you can refer to the Max 10 Development kit Board Schematic. I share you the link below:

https://www.intel.com/content/www/us/en/content-details/649730/intel-max-10-development-kit-board-schematic.html?wapkw=hsmc%20max%2010&DocID=649730

Forum Discussion

HSMC to GPIO

Recent Discussions

adding signal to debug/signaltap

SDM & Configuration Interface

Need Part EOL status(Active/Obsolete/Discontinued/NRND)

Agilex 7 JTAG Config Fails at 1% on Board #2 (Error 18950 / CONF_DONE Low) - But Board #1 Works

ECCN and HTS code for 1SX110HN2F43E2VG