Altera_ForumHonored Contributor16 years agohowto use LEs insted of M9K? Hi, I'm using a UART 16550 core from opencores in the SOPC builder, works very fine. It has build-in rx/tx FIFO, 16 Byte each. Quartus II uses a whole M9K-Block, which means a lot of wasted RAM. M...Show More
Altera_ForumHonored Contributor16 years agothe Verilog ramstyle synthesis attribute is also worth looking at.
Recent DiscussionsHow to tell Quartus my Arria10 target system CLKUSR frequency is 100MHz?Agilex 3 PLL in Source Synchronous mode ?writing a word to cfm1 using on chip flash ip on max10MAX10 FPGA IOs not entering Tri-state (Hi-Z)To INTEL - Request for Compliance Data from your customer