Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
15 years ago

how to design the system using SSRAM CY7C1470V33 in the sopc builder

HI we are using the SSRAM CY7C1470V33 in our design (instead of CY7C1380C which is part of the SOPC builder). How do we go about designing the system . Please help us regards, Bhandari
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
15 years ago

Hello

I have same problem with connectiong sram and flash. I added flash and sram 256x16. Flash from SOPC library and sram with my new component. In sopc project I have 2 address spaces: one for flash and one for sram but I have one space for data: 16 bits. Sram have 16 bit data bus and flash 8 bits. How can I connect flash and sram to one 16 bits bus? Can I split those data buses?