How do I add an External JTAG port to project on Quartus Prime Lite V21.10

Question

we have max 10 and I can't find where or how to add the external JTAG programmer to the project;  the pins show up on the device as Unconnected???

fvm · Answer

Hi,there are pinout files and pin connection guidelines., answering all possible questions related to JTAG interface design. What's the specific problem, where do you see JTAG pins as unconnected?

nuraiman_m_intel · Answer

Hi,Can you elaborate more on your problem? Please also provide screenshot of the problem.Regards,Aiman

nuraiman_m_intel · Answer

Hi,Make sure to follow the guidelines provided:Configuration userguide:https://www.intel.com/content/www/us/en/docs/programmable/683865/current/jtag-configuration-setup.htmlPin connection guidelines:https://www.intel.com/content/www/us/en/docs/programmable/683232/current/fpga-device-family-pin-connection-guidelines.htmlRegards,Aiman

nuraiman_m_intel · Answer

We do not receive any response from you to the previous answer that I have provided. This thread will be transitioned to community support. If you have a new question, feel free to open a new thread to get the support from Intel experts. Otherwise, the community users will continue to help you on this thread. Thank you

Forum Discussion

How do I add an External JTAG port to project on Quartus Prime Lite V21.10

4 Replies

Recent Discussions

Avalon-ST configuration with Agilex 3 fails

Cyclone IV E – PLL Power Track Width Recommendation Clarification

Operating temperature for 10M08DCF256A7G

System PLL of Agliex5 PCIE example design cannot be locked after configuration

Download links not working