Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
8 years ago

Hot-Socketing Arria10 transceiver GX

In An 692 says: "Intel Cyclone 10 GX, Intel Arria 10, and Intel Stratix 10 devices do not support 'Hot-Socketing' except under the conditions stated in the table below. The tables below also show ...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
8 years ago

This is a pertinent thread and I also have some questions:

1) How do we know that Transceiver Rx signal levels are <1.1 Vp-p? Can we infer that they will be safe if connected to other Altera Transceiver Tx outputs or must they be actually measured at the device balls?

2) What does it mean to drive to VCCIO if powered down? Does this mean the local VCCIO (which will also be powered down by definition) or the remote active VCCIO?

3) What do the '-' cases mean? Do these mean that these cases are not allowed or can't happen???