Forum Discussion

Niko3's avatar
Niko3
Icon for Occasional Contributor rankOccasional Contributor
2 years ago
Solved

high input current with EPM3064A TQ44

Is there a condition that inputs of an EPM3064A-TQ44 sinks so much current that a comparator output (MAX9201) cannot set it to high level? This happens during testing when no clock input is active.
Board Debug
  • Niko3's avatar
    Niko3
    2 years ago

    Hi,

    something with programming was wrong. I don't know what it could have been. But after reprogramming - the same way as before and all the time - it works well.

4 Replies

  • AqidAyman_Altera's avatar
    AqidAyman_Altera
    Icon for Regular Contributor rankRegular Contributor
    2 years ago

    Hi,


    Can you elaborate more on this issue?


    However, I found that you are using an obsolete device so I afraid there is no more support for this device.


    Regards,

    Aqid


    • Niko3's avatar
      Niko3
      Icon for Occasional Contributor rankOccasional Contributor
      2 years ago

      Hi,

      something with programming was wrong. I don't know what it could have been. But after reprogramming - the same way as before and all the time - it works well.

  • AqidAyman_Altera's avatar
    AqidAyman_Altera
    Icon for Regular Contributor rankRegular Contributor
    2 years ago

    Hello,


    Does it mean the issue was resolved after you reprogramming the device?




  • AqidAyman_Altera's avatar
    AqidAyman_Altera
    Icon for Regular Contributor rankRegular Contributor
    2 years ago

    As we do not receive any response from you on the previous question/reply/answer that we have provided, please login to ‘https://supporttickets.intel.com’, view details of the desire request, and post a feed/response within the next 15 days to allow me to continue to support you. After 15 days, this thread will be transitioned to community support. The community users will be able to help you on your follow-up questions.