Forum Discussion

Honored Contributor

11 years ago

Help with DE0's Cyclone III (Noob)

Hi every one, I just got my first board, the DE0.(Not the NANO). I have been using the DE2 in my labs in the university and wanted some practice at home. My interest is using Assembly and C but i jus...

Altera_Forum

Honored Contributor

11 years ago

here you are.

http://www.terasic.com.tw/cgi-bin/page/archive.pl?language=english&categoryno=165&no=364&partno=4&timestamp=1423816598

you can download its CD-ROM resource.

you can get .sof file from

DE0_CD-ROM_v.1.1/Demonstrations/DE0_NIOS_SDCARD/DE0_TOP.sof

also you can get .sopcinfo file form

DE0_CD-ROM_v.1.1/Demonstrations/DE0_SOPC.sopcinfo

you can even rebuild sof file by compiling the project.

Forum Discussion

Help with DE0's Cyclone III (Noob)

Recent Discussions

Cyclone-V SCFIFO - adding ECC to M10K/MLAB/Auto memory

Will serialization factor of 6 in LVDS serdes IP be supported in the future on Agilex5?

System PLL of Agliex5 PCIE example design cannot be locked after configuration

JTAG Chain Broken on Agilex 7-I Dev Kit

Request for Cyclone V Pinout File Information