Help for Boundary Scanning

Question

Hello, I am very new to boundary scanning, currently I am using Quartus II web edition and Cyclone III for my work. I have designed my circuit but now I want to test it using Boundary Scanning. I have no idea to work for Cyclone III on quartus for boundary scanning.

PLEASE HELP ME.:confused:

altera_forum · Answer

You need a boundary scan tool to do that, it isn't provided in Quartus. If you don't have any, you can have a look there (http://www.jtaglive.com/products/buzz) for example (I haven't tried it though)

altera_forum · Answer

Thanx man, I am using TOPJTAG kindly suggest me whether it will do or not.

altera_forum · Answer

thanx man, it worked flawlessly thanx:)

Forum Discussion

Help for Boundary Scanning

3 Replies

Recent Discussions

Agilex 7 F Series Transceiver Pins Allowed Voltages During Powerup/When Unpowered

MAX10 Soft SERDES set_input_delay constraints

MAX10 1.8V LVDS Output before, during, after configuration driving LVDS 1.5V VCCIO Inputs

Cyclone 10 LP Error Detection Timing

QSPI DDR Interface with Cyclone10LP: Maximum frequency