Forum Discussion

New Contributor

3 years ago

Guidance on using an MCU and generic flash as an EPC1QC20 replacement

Hi, I'm looking to use a generic flash and small micro as a replacement for the EPC1QC20. Specifically using Passive serial with an SPI interface. Is there any guidance documents or example code o...

hareesh

Frequent Contributor

3 years ago

hi Jack Wallace,

in bellow given document link you can find out all information about generic serial flash and example design. please go through this document.

link:

https://www.intel.com/content/www/us/en/design-example/714709/cyclone-v-generic-serial-flash-interface-and-nios-ii-booting.html?

https://learning.intel.com/developer/learn/course/internal/view/elearning/175/using-the-generic-serial-flash-interface

Forum Discussion

Guidance on using an MCU and generic flash as an EPC1QC20 replacement

Recent Discussions

Help with BTS and .sof example files for Agilex 7 AGM039EA

Quartus Prime Pro 25.1 fatal error during fitter: Windows "Efficiency mode" required

Quartus Pro simulation libraries for Riviera Pro

RoHS declaration of 10M50DDF256C8G

Request for COO info