Forum Discussion

ZLu001's avatar
ZLu001
Icon for New Contributor rankNew Contributor
7 years ago

for Cyclone V, Can't configure EPCS64 by .jic file using USB blaster.

.sof is OK, for Cyclone IV and EPCS16 is OK. For Cyclone V and EPCS64, all MSEL pins are grounded. Error message: "Error (209025): Can't recognize silicon ID for device 1. A device's silicon ID ...
JohnT_Altera's avatar
JohnT_Altera
Icon for Regular Contributor rankRegular Contributor
7 years ago
Hi, I think the 1st picture is refering to Cyclone FPGA which is Cyclone I. While the 2nd picture refer to the Cyclone V FPGA. I would recommend you to follow the document for Cyclone V FPGA.