Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

Flash Programming

I dont want to use a flash programmer to download my .flash file to CFI flash. I am able download the .flash file to CFI flash succesfully, using the alt_write_flash. When i power up ...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

--- Quote Start ---

When i power up the board, i expect my program to run from the flash and print hello world.Unfortunatly it code is running .

Please let me know in case if im missing something.

--- Quote End ---

If I understand you right, the code is not running.

Are you sure the FPGA configures?

Please check the CONF_DONE and nSTATUS pins (and INIT_DONE, if used).

These should be high after correct configuration.

Success, Ton