Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

Flash generated using sof2flash fails to configure fpga

Hi , I have Stratix IV development kit , I want to load Flash file converted using sof2flash utility. when i use nios2-flash-programmer it works fine . but it fails to configure FPGA fro...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

I used sof2flash with the following options:

sof2flash --input=stratix_iv.sof --output=stratix_iv.flash --offset=0xC20000 --pfl --optionbit=0x18000 --programmingmode=FPP

Success, Ton