Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
17 years ago

Flash Device Access

Hej I am using my custom board where I have an external flash device attached..I want to read and write the flash device..I read the manual Nios II Software Developer's Handbook...and acording...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
17 years ago

and its differnt in each and every entry....and also..when i tried the --debug option....it was saying like this...

Using cable "USB-Blaster [USB-0]", device 1, instance 0x00

Resetting and pausing target processor: OK

No CFI table found at address 0x03000000

Original contents <after writing 0xF0 and 0xFF to address 0x3000000):

"values at the lcoations"

Leaving target processor paused.