Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
17 years ago

External SRAM Timing Problems

Hi all, I work on a task of porting NiosII Softcore processor, JTAG UART, SRAM, FLASH, ON-CHIP along with a Tri-State Bridge in Cyclone III(EP3C25F324C8). I had the program compiled sucessf...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
17 years ago

In your SOPC_builder,you could find which device's address is include 0x5000000 and 0x500F79B,then you can surely about which device is going wrong.

[/B][/B]