Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
11 years ago

Error 170084 ADC & PLL

Given: Quartus 14.1.1 build190 BeMicro Max 10 10M08DAF484 System clock on N14 Error (170084): Can't route signal "ADC06:inst|ADC06_altpll_0:altpll_0|ADC06_altpll_0_altpll_5q22:sd1|wire_pll...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
9 years ago

Hi Mikell, it refuse to program after first time.

Here is detail of what happened,

http://www.alteraforum.com/forum/showthread.php?t=54757

today I try'd to load a simple counter dividing 50MHz sys input clock then driving some pin to 0 and with 1MHz, 500 & 250KHz toggle. Pin remain as it where open. SOF say success but doesn't work, Flash accept just erase and examine.

Thank in advance.

Roberto