Forum Discussion
Altera_Forum
Honored Contributor
Honored ContributorError 170084 ADC & PLL
Given: Quartus 14.1.1 build190 BeMicro Max 10 10M08DAF484 System clock on N14 Error (170084): Can't route signal "ADC06:inst|ADC06_altpll_0:altpll_0|ADC06_altpll_0_altpll_5q22:sd1|wire_pll...
Altera_ForumHonored Contributor
Honored Contributor --- Quote Start --- I found it. Bummer! From the Max 10 ADC data sheet. "Depending on the device package, the MAX 10 devices support one or two PLLs—PLL1 only, or PLL1 and PLL3." The BeMicro Max 10 Sys Clk is on pin N14 or PLL2. Mike --- Quote End --- And what about QSYS ADC tool, does it work with all of it? In my case - no. :cry:
