SyafieqSSuper Contributor4 years agoHi Nir,What device are you referring to? Seems like Max II. Assuming yes, what Quartus are you using? Make sure the Quartus supports the device.
Nir1New Contributor to SyafieqS4 years agoI'm using both Quartus 17.0 and Quartus 13.0. these Quartus support all EPM240 types except EPM240G.
Recent DiscussionsASx4 Interface debug in MSEL=111 (JTAG mode)Avalon-ST configuration with Agilex 3 failsMAX 10 FPGA Programming Failure via JTAG – nSTATUS & CONFIG_DONE as No ConnectB32A (1591) Package Mechanical DrawingRequest for Cyclone V Pinout File Information
New ContributorNew ContributorNew Contributor
