Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
8 years ago

EPCS4SI8N > EPCQ4ASI8N For Old Cyclone FPGA

I'm new here. Looking to migrate from Obsolete EPCS4SI8N to EPCQ4ASI8N and noticed The Fast Read Dummy Cycles is 8 on the new part while it is only 1 on the obsolete part. If I'm running the New Pa...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
8 years ago

Hi Mark,

Please check the table:29 in below link.

http://www.mouser.com/ds/2/612/cfg_cf52012-1098931.pdf.

Note:Number of dummy cycles. When this number is from 0001 to 1110, the dummy cycles is from 1 to 14.

Check the manual for more information

Best Regards,

Anand Raj Shankar

(This message was posted on behalf of Intel Corporation)