Forum Discussion

Honored Contributor

8 years ago

EPCS4SI8N > EPCQ4ASI8N For Old Cyclone FPGA

I'm new here. Looking to migrate from Obsolete EPCS4SI8N to EPCQ4ASI8N and noticed The Fast Read Dummy Cycles is 8 on the new part while it is only 1 on the obsolete part. If I'm running the New Pa...

Altera_Forum

Honored Contributor

8 years ago

Hi,

You can configure the number of dummy cycles.

Check the link for compatibility and timing information.

https://www.altera.com/en_us/pdfs/literature/an/an727.pdf

http://www.mouser.com/ds/2/612/cfg_cf52012-1098931.pdf

Best Regards,

Anand Raj Shankar

(This message was posted on behalf of Intel Corporation)

Forum Discussion

EPCS4SI8N > EPCQ4ASI8N For Old Cyclone FPGA

Recent Discussions

Avalon-ST configuration with Agilex 3 fails

Cyclone IV E – PLL Power Track Width Recommendation Clarification

Operating temperature for 10M08DCF256A7G

System PLL of Agliex5 PCIE example design cannot be locked after configuration

Download links not working