Honored Contributor
Honored ContributorYes include all tcl files...
Quartus version 8.1 error message : --- Quote Start --- Error: Current Strength logic option is set to 12mA for pin "ddr2_dq[0]", but setting is not allowed with a Termination assignment Error: Current Strength logic option is set to 12mA for pin "ddr2_dq[1]", but setting is not allowed with a Termination assignment Error: Current Strength logic option is set to 12mA for pin "ddr2_dq[2]", but setting is not allowed with a Termination assignment Error: Current Strength logic option is set to 12mA for pin "ddr2_dq[3]", but setting is not allowed with a Termination assignment Error: Current Strength logic option is set to 12mA for pin "ddr2_dq[4]", but setting is not allowed with a Termination assignment Error: Current Strength logic option is set to 12mA for pin "ddr2_dq[5]", but setting is not allowed with a Termination assignment Error: Current Strength logic option is set to 12mA for pin "ddr2_dq[6]", but setting is not allowed with a Termination assignment Error: Current Strength logic option is set to 12mA for pin "ddr2_dq[7]", but setting is not allowed with a Termination assignment Error: Current Strength logic option is set to 12mA for pin "ddr2_dq[8]", but setting is not allowed with a Termination assignment Error: Current Strength logic option is set to 12mA for pin "ddr2_dq[9]", but setting is not allowed with a Termination assignment Error: Current Strength logic option is set to 12mA for pin "ddr2_dq[10]", but setting is not allowed with a Termination assignment Error: Current Strength logic option is set to 12mA for pin "ddr2_dq[11]", but setting is not allowed with a Termination assignment Error: Current Strength logic option is set to 12mA for pin "ddr2_dq[12]", but setting is not allowed with a Termination assignment Error: Current Strength logic option is set to 12mA for pin "ddr2_dq[13]", but setting is not allowed with a Termination assignment Error: Current Strength logic option is set to 12mA for pin "ddr2_dq[14]", but setting is not allowed with a Termination assignment Error: Current Strength logic option is set to 12mA for pin "ddr2_dq[15]", but setting is not allowed with a Termination assignment Info: Fitter preparation operations ending: elapsed time is 00:00:03 Error: Can't fit design in device Error: Quartus II Fitter was unsuccessful. 17 errors, 4 warnings Error: Peak virtual memory: 253 megabytes Error: Processing ended: Tue May 05 14:23:19 2009 Error: Elapsed time: 00:00:13 Error: Total CPU time (on all processors): 00:00:10 Error: Quartus II Full Compilation was unsuccessful. 19 errors, 367 warnings --- Quote End --- Thanks for help
