Forum Discussion

EE通行's avatar
EE通行
Icon for New Contributor rankNew Contributor
2 years ago
Solved

EP2C8Q208C8N can use PCle's high-speed serial transceiver

We want to design a high-capacity data acquisition device (32-bit 128G), and the FPGA chip used is EP2C8Q208C8N. Due to the fact that EP2C8Q208C8N only reserves 2 external DDR4 I/O ports, it is diffi...
Configuration
  • Wincent_Altera's avatar
    Wincent_Altera
    2 years ago

    Hi,


    For Cyclone II PCI Express, you may refer to our device handbook

    Cyclone® II Device Handbook

    The recomendation for customers is to use PCIe Hard IP, as users no need to do intergration with 3rd party PHY chip.

    There are many PCIe reference designs available in application note AN456.


    Page 12 of Application Note AN456 has the link to download the PCIe example designs for different dev kits. You may select Arria II


    Regards,

    Wincent_Intel


Wincent_Altera's avatar
Wincent_Altera
Icon for Regular Contributor rankRegular Contributor
2 years ago

Hi,


For Cyclone II PCI Express, you may refer to our device handbook

Cyclone® II Device Handbook

The recomendation for customers is to use PCIe Hard IP, as users no need to do intergration with 3rd party PHY chip.

There are many PCIe reference designs available in application note AN456.


Page 12 of Application Note AN456 has the link to download the PCIe example designs for different dev kits. You may select Arria II


Regards,

Wincent_Intel


  • EE通行's avatar
    EE通行
    Icon for New Contributor rankNew Contributor
    2 years ago

    Dear wchiah,


    I am very sorry for not being able to review and respond to your response in a timely manner as I have been busy designing circuits recently. Thank you very much for your help.

    Best wish，

    EE通行