Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
18 years ago

EP1C3T100C8N FPGA configuration problem

Hi everybody, In my design I use an EP1C3T100C8N cyclone which gets configured from an EPCS1 serial device. EPCS1 is programmed from an external microcontroller that gets the data stream f...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
18 years ago

For those of you that got an EP1C3T100C8 equiped evaluation board, is it possible that you download my design to see if configuration runs well?

The design is a simple 4 bits synchronous binary counter which receives clock on CLK2 pin and outputs on Pins 78, 79, 86, 87.

It can be downloaded from http://musanek.free.fr/altera/

The zip archive contains two programming files one in pure binary, the other is intel HEX format.

Thanks a lot.