Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
18 years ago

EP1C3T100C8N FPGA configuration problem

Hi everybody, In my design I use an EP1C3T100C8N cyclone which gets configured from an EPCS1 serial device. EPCS1 is programmed from an external microcontroller that gets the data stream f...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
18 years ago

I had a look at cyclone's datasheet.

Unfortunately in AS mode, MSB is emitted first (see figure 13-1 AS Configuration Waveform).

Whitebird.