Forum Discussion

open01's avatar
open01
Icon for Occasional Contributor rankOccasional Contributor
4 years ago

EMIF calibration failure

Hi, I use Cyclone 10 GX devices. Quartus version is 17.1 pro, and use MT25Q Flash device. I found that when I use the .rpd file of the ASx1, the function of the FPGA after power-on is normal....
  • open01's avatar
    open01
    Icon for Occasional Contributor rankOccasional Contributor
    4 years ago

    Hi,

    Thank you very much for your reply.

    In my case, the device of MT25QU can be used normally (in the case of ASx1)

    And ASx4 also seems to have successfully configured the FPGA (but only the EMIF calibration failed)

    Could you give me some advice？

    Thanks for your answers.