Honored Contributor
Honored ContributorDear Daixiwen
I can catch PHY!! indeed is hardware of MDIO problem . Now NiosII message tell me Your Enthenet MAC address is 00:07:ed:ff:3d:e5 prepped 1 interface , initalzing... [tse_mac_init] INFO : TSE MAC 0 found at address 0x05002000 INFO : PHY Marvell 88E1111 found at PHY address 0x10 of MAC Group[0] INFO : PHY[0.0] - Automatically mapped to tse_mac_device[0] INFO : PHY[0.0] - Restart Auto-Negotiation , checking PHY link... INFO : PHY[0.0] - Auto-Negotiation PASSED. MARVELL : Mode changed to RGMII/Modified MII to Copper mode MARVELL : Enable RGMII Timing Control MARVELL : PHY reset INFO : PHY[0.0] - Checking link... INFO : PHY[0.0] - Link not yet established , restart auto-negotiation... INFO : PHY[0.0] - Auto-Negotiation PASSED INFO : PHY[0.0] - Link established INFO : PHY[0.0] - Speed = 100 , Duplex = Full OK , x=0 , CMD_CONFIG=0x00000000 MAC post-initalization : CMD_CONFIG=0x04000203 [tse_sgdma_read_init] RX descriptor chain desc (1 depth) created mctest init called IP address of et1 : 0.0.0.0 But...now I still not Catch IP ... and LED message indicate is not denormal. (LED_TX unright) I try of de2-115 board test web_server_socket , and function is normal. (LED_TX right) so ... I exclude Internet cable problem of possibility ... I think maybe is my TX_DATA Problem...
