Forum Discussion

KfirTito's avatar
KfirTito
Icon for New Contributor rankNew Contributor
3 years ago

Device configuration failed + CRC error while using .jic file

Hi, FPGA model : C10LP120YF780I7G, Vcore = 1.2V , Vccio = 3.3V (conf dev IO voltage) Flash model : MT25QL128ABB Conf Scheme : AS (x1) , MSEL[3:0] = 1101 (AS, Fast, 3.3V) JTAG Conf : Single Devic...
WZ2's avatar
WZ2
Icon for Frequent Contributor rankFrequent Contributor
3 years ago

Hi there,

I wanted to check if you have any further questions or concerns. If not, I will go ahead and mark this issue as resolved.

Additionally, we would greatly appreciate it if you could take a moment to fill out our survey. Your feedback is valuable to us and helps us improve our support quality.

Thank you for your time and cooperation.

Best regards,

WZ


  • KfirTito's avatar
    KfirTito
    Icon for New Contributor rankNew Contributor
    3 years ago

    Hi ,

    Regarding rbf content read - we decided to prioritize it as low priority issue.

    Regarding the survey - sure .

    You can mark this issue as resolved.

    10x