Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
14 years ago

Device cannot start

Hello,, I use Cyclone iii ls (EP3CLS200F780C7N) Development Board. I Tried to configure ROM (EPM2210F256C3N). But I received unexpected output.. All JTAG Anti-Tamper select, Configuration Se...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
14 years ago

Right. You can't detect kit because one's detecting through maxII pld, rather maxII pld implements onboard usb-blaster. maxII config contains in certain rom sector.

So, similar issue may occur when you erase rom sector containing maxII config.